High Temperature Heat pumps’ outlet water temperature reach 80℃, which can satisfy most water demand for high temperature water in industrial production.
Feature2: EVI System
EVI Compress Section View
Combined the Copeland compressor with the C&S heat exchanger is able to reduce the electric consumption to 1/2~2/3, compared with the electric water
EVI compressor specially designed for high water temperature.
Feature3: High EFFICIENCY Tube in Shell Heat Exchanger Section View
Combined the Copeland compressor with the C&S heat exchanger is able to reduce the electric consumption to 1/2~2/3, compared with the electric water
This increase the heat exchange area, improving the liquid wettability and evenly distribution on the surface of copper, reducing water film, and improving efficiency.
The thickness of the copper pipe is 0.8~1.2 mm, there is no welding inside the pipe. With 100% pressure - bearing property, the copper pipe is without any leakage under 5MP pressure test.
Outside fin effcient non- phosphate copper，the area of heat-exchanging is 3.7 times of smooth brass, and the high heat exchange efficiency.
The heat exchange copper coil is in spiral distribution and with compact structure. For small gap of refrigerant passage, this can ensure effectiveness of heat exchanging, and prevent lubricant accumulation.
The design of double channel and hydraulic route can make water flow in tube and refrigerant run in shells. Also the temp. sensor on waterpipe detects whether the ice blocks the pipe to ensure the system security.
high temperature water heaters SUPERIORITIES
Automatic Control
PHNIX high temperature heat pump can control temperature accurately even in ±1℃ that ensure the units run stably and have great anti-interference.
Green Refrigerant R134a
At the same condenser pressure, R134a condenser temperature is higher than other refrigerant, so the water temperature is higher than others. Therefore, it gets the manufacturers’ favor.
Specification
high temperature water heaters schematic
The system of the high temperature water heater is the same as traditional heat pump that includes the compressor, condenser, expansion valve and the evaporator. We use it in recirculation. The high temperature water heater provides 75℃ water for users, meanwhile, the cold water will compensate in the tank and be heated by the unit again. Then the cycle repeats.
